Port-A-Torch Kit with Oxygen & Acetylene Tanks for Cutting Welding Brazing. Included: Additional Tips, Tips, Torch. Tools Product Type: Power Tool. Torch Cooling Method: Air Cooled. The Lincoln Electric Port-A-Torch Kit allows you to cut, weld and braze all in 1 lightweight carrying case.The kit is designed to be easily carried to the site and features a high-impact frame. As supplied the outfit is capable of cutting 1 in. And welding up to 1/16 in. Welding hose, welding goggles, torch handle, cutting attachment, oxygen regulator, acetylene regulator, cutting and welding tips, mixer and flint striker. Designed to carry 1 MC acetylene cylinder and one 20 cu. Able to cuts 4 in. And welds up to 1/2 in. With larger tips and large acetylene cylinder. Base-unit includes a black-polycarbonate frame, nylon shoulder straps and outer storage pockets. Also includes a brass torch handle with built-in, reverse-flow check valves, a cutting attachment with solid, forged-brass head, tail and stainless-steel tubes and easy-to-read scale gauges. Capable of cutting 1 in. At this point in time I haven't been able to.. So far it is working fine. Super cutting and welding outfit. So on the box it reads in BIG bold writing READY TO CUR AND WELD but in little tiny letters it sa.. So on the box it reads in BIG bold writing READY TO CUR AND WELD but in little tiny letters it says tanks are empty... If tanks are empty how can it be ready to cut?
I was pretty disappointed with that, I cant see how saying it's ready to cut isn't false advertising but after it was all said and done product works great. I did much research before purchasing this torch set and chose this one because the oxygen and ac..
I did much research before purchasing this torch set and chose this one because the oxygen and acetylene bottles could be exchanged in Lincoln, Nebraska. This is the only product I found in this price range that had certified bottles. Also, the components were made at the Lincoln Electric Harris plant in Poland. Harris, a Lincoln Electric company, I found to be a trusted brand in this field.I had a need for a small torch for brazing to replace a Map/Oxy torch that used small disposable cylinders and thus was too expensive to operate. The quality is first rate and accessories, such as torch tips and mixers, are readily available. I love this set and highly recommend it.
This set is supplied with a #3 tip so a word of caution is in order: the acetylene maximum flow rate rule of 1/7th the capacity of the cylinder per hour (1.43) is a limiting factor so in order to comply you must use a #0 tip which will consume 1.1 to 3.3 cu. Per hour assuming a neutral flame. It's what every hobbyist welder and medalist needs. Don't get the cheap stuff.
Work great just needed to loosen some bolts.. Work great just needed to loosen some bolts. Torch arrived in good condition and the tanks had appropriate.. It's a nice portable cutter/welder by all means. Very convenient, pretty light to carry around, and works awesome!
Only problem I encountered was it did not come with hoses when it was delivered. Spent only 2 days finishing I had.. Spent only 2 days finishing I had been trying to finish for 2 years with this welding kit.
Everything about this product says quality. Right out of the box, you can see and feel the fine c..Right out of the box, you can see and feel the fine craftsmanship and precision of fit and finish. Find yourself a good welding supply store where the employees have the heart of a teacher and really want the home'hobbyist' to succeed.
Take the time, do the research, develop good safety procedures and you will succeed. It works great as expected! It works great as expected! Arrived quickly everything seems to be of fantastic quality at this price. I don´t think you coul..
I don´t think you could get set up this easily anywhere else. Everything has worked as it should. Upon arrival one of the gauges (The low pressure Acetylene) Was not functioning properly. It reads 5 psi at all times until the gauge is adjusted above this level.It cuts like any but the large torches and has all the adjustment and controllable nature you could expect from a big name brand like Lincoln. Great product excellent quality you get more than what described on the product info fast shippin.. This is a quaility torch, It is every bit as nice as my full size Harris torch and its small size is perfect for any small home jobs. I wish Home Depot st..
I wish Home Depot stocked other tips and had a better selection of consumables (hint). Excellent setup and does the job as expected. Used to to free up some seized water pump bolts on..Used to to free up some seized water pump bolts on a truck where propane would not do the job properly. You will lose the shiny new tanks as others have stated when getting the tanks swapped out at the local welding supplier. Arrived on time, and as advertised..
Arrived on time, and as advertised. A solid unit except the plastic handles on the regulator's. Other than that very satisfied. The first reviewer is an idiot.
Anyone with a brain knows they DO NOT come filled already. Perhaps he shouldn't even be allowed to have one. Its because of people like that we have to have warning labels on everything. Customer service is our top priority!
Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions.
Thank you for shopping with us. If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country.An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. The item "Port-A-Torch Kit with Oxygen and amp Acetylene Tanks for Cutting Welding" is in sale since Wednesday, February 27, 2019. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\Gas Welding Torches".store" and is located in multiple locations .
This item can be shipped to United States.