So that the arc voltage is fixed, the same is the height of cutting torch. Generally, the instruction will list all the cutting parameters for some type of plasma. The user can refer to these parameters. Adjust the voltage in arc voltage height controller to match the selected current. Working voltage: DC24±10%50Hz/60HzPlease prepare a isolated power, do not shared with others such as electronic valve.
Especial Pay more attention the DC 24V l Lift motor: DC24V DC motor l Drive mode: PWM l Output current1A-4A. L Working temperature: Height controller -10? L IHS style: Switch inspecting IHS (suitable for all plasma both above-water and under-water cutting) Plasma Shield Protector IHS (suitable for above-water cutting's touch leading arc voltage plasma) l Running transfer: Alternative Arc transfer and pierce transfer l Divided voltage ratio:100:1 l Accuracy: ±1V? ±5Vadjustable l Outer Dimension: Length X Width X Height: 225mmX50mmX80mm Weight 0.8kg Protection class: IP64, to prevent dust from entering.
Installation connector: 2-pin, 4-pin, 5-pin, DB-9 core Installation position: Keep away from heat, air convection good place. LCD: display the working status and parameters. Manual: Auto / Manual mode selection increase, alternating work. Arc test: standby press, arcing into the test mode. When arcing test, press to return to standby mode.Menu: In standby mode press to enter the parameter setting mode. When the parameter setting Press to return to standby. Confirmation: parameter setting mode, confirm that the setparameters. Rise / fall: In standby mode, manual lifting torch.
When parameter setting, subtraction parameter values. Remote is defined as islands and highlands; or a post code/zip code that is difficult to serve; or a suburb/town that is distant, inaccessible or infrequently served. We are looking forward to a further extension of pleasant business relation. 4 X Matching plugs(2 -pin 4-pin 5-pin 9-pin).
ECheque will be held until cleared. This item is ALL BRAND NEW and in the original factory box and packing, All products have been checked and packaged in good condition before dispatch. We will give you a return ID. Meanwhile Please tell us what the defect is, to eliminate improper use. The item "Torch Height Controller THC HP105 for Arc Voltage CNC Plasma Cutting Machine" is in sale since Thursday, September 8, 2016.This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\Plasma Cutters". The seller is "gold-bucket" and is located in Shenzhen.
This item can be shipped worldwide.