Welding Cutting Torch

VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)

VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)
VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)

VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)

Pictured with 288 Flashback Arrestors, we are currently out of stock of 288s. VICTOR 315FC TORCH HANDLE W/CA2460 CUTTING ATTACHMENT PROPANE KIT SETUP!!! THIS IS A PROPANE SETUP. PROPANE CUTTING TIPS ARE INCLUDED. THE TIPS AND OTHER ITEMS ARE EITHER VICTOR TYPE AFTER MARKET OR FOR GENERIC CONSUMPTION.

Yes, this torch can accept Acetylene and other gases and can use other tips including acetylene cutting tips, heating tips, and the handle can handle 300 Series (Heavy Duty) Welding/Brazing Tips - all available in our store. We assembled this package for our Propane Cutting Specialists in the field. Qty (1) 1-GPN-#0 Premium quality, brand-new Victor style Propane/Natural Gas cutting tip.

Qty (1) 1-GPN-#1 Premium quality, brand-new Victor style Propane/Natural Gas cutting tip Qty (1) 1-GPN-#2 Premium quality, brand-new Victor style Propane/Natural Gas cutting tip Qty (1) 1-GPN-#3 Premium quality, brand-new Victor style Propane/Natural Gas cutting tip Qty (1) 1-GPN-#4 Premium quality, brand-new Victor style Propane/Natural Gas cutting tip Qty (1) Soapstone- Approx. 1855 Thickness, Grade A White Soapstone (Micro Metered Measurement-not guessing, or copying and pasting) Qty (1) Soapstone Holder- Approx. (Micro Metered Measurement-not guessing, or copying and pasting).

Brass trigger depresses and slides to proper alignment hole and snaps back to lock in position. Non-corrosive channel with brass indexing trigger provides sliding action. Spring steel pocket clip oversized to fit leather aprons or thick denim.

Qty (1) Pair Red Welder Gloves. Full cotton liner, Cow split, Reinforce in thumb, One piece of back, Size:15 w/ minor variations. Qty (1) Tip Cleaner Set-100mm size, includes Size numbers 6-26 Tip and Files, tapered ends, aluminum case.

Qty (1) Triple Flint Striker for Welding. Qty (1) Set of 188 Flashback Arrestors (connects at the torch end) Pictured with 288 Flashback Arrestors, we are currently out of stock of 288s. Qty (1) Set of additional Check Valves. Additional Specs on Flashback Arrestors and Check Valves. I nlet Pressure(bar): 10.

288-L FUEL GAS (ISO 9001). Inlet Pressure(bar): 1.5.

Oxygen-Acetylene (or propane) Flashback 288 Arrestor Set. OXYGEN/ACETYLENE WELDING CHECK VALVE SET--FOR TORCH END use w/flashback arrestor. (Our Item# Check Valve CBB-1309 Set)-. You should never connect a welding torch to acetylene and oxygen tanks without first installing a set of flashback arrestors and check valves. Not using these safety devices, could possibly cause a flashback within the hose, then ultimately flow back into the tanks, causing a major explosion.

This is an extremely rare occurrence, but a set of check valves and flashback arrestors will prevent it a from occurring. Check valves on the torch are a first, then Flashback arrestors on the gauges are the best protection possible. Don't take chances with your life or the life of others...

Additional Specs on the Regulators. Note: Instructions Not Included; No booklet included. Victor 315FC torch handles for welding, brazing, cutting, and heating applications. These heavy duty 315FC torch handles feature durable brass and stainless steel construction and threaded assembly design for ease of maintenance and repair. Victor torch handles have provided the foundation for welding, cutting, brazing and heating applications for decades.

Built-in reverse flow check valves no need for accessory check valves. Built-in flashback arrestors with no need for accessor flash arrestors.

Works with all fuel gases. There are pressure restrictions for different gases. CA 2460, Heavy-Duty Cutting Attachment.

Stainless steel tubes with Smooth cutting valve (push type). Brass coupling nut & double O ring tapered seal gives quick gas-tight seal without a tightening wrench.

Weight 26.625oz (754.806gms). Gas Service: For use with all fuel gases with appropriate tip. Cutting Range: 8 (20.32 cm). Length: 9.75 (24.765cm) (not counting lever extension), Approx. Weight: 26.625 oz (754.806gms).

Heavy duty cutting attachment-may use any fuel gas with proper cutting tip. Spiral mixer blends oxygen and fuel.

Total Torch Length: Approximately 18.75 (47.625cm). Outlet Connection: 9/16 Iron lid.

Max Outlet Pressure: 1.5bar. Inlet Connection: CGA510 Outlet Connection: 9/16-LH Iron lid. Then as any experience welder should do, check your lines, torch, and all connections with soap and water for leaks before igniting. Note: Boxes may show aging and wear. Note: These are torches that have been stored and before EASB Branding.

(Not including weekends and holidays). Cutting Tips-Propane (100 Series Torches). Flashback Arrestors and Check Valves.

Even if the items are from different categories. These items are new in box (NIB) unless otherwise specified. You must be 18 or older to order this product. In some areas, state and local laws further restrict or prohibit the sale and possession of some of our products, including air soft, blowguns, knives, etc. States: California, District of Columbia. Cities: Bridgeport (CT), Chicago (IL), Atlantic City (NJ), New York (NY), Brooklyn (NY), Bronx (NY), Staten Island (NY), Queens (NY), Glen Oaks (NY), Floral Park (NY), Philadelphia (PA). This product, if air soft, knives, or blowgun, may be mistaken for a firearm (or weapon) by law enforcement officers or others, and altering its color or brandishing, or even possession, of the product in public may be considered a crime.

It is unlawful to alter the coloration or markings to make the product look more realistic. If and air soft product, then it is considered an Air soft toy gun; it complies with all federal laws and regulations. We do not provide warranties with our products. Some items we are fully able to test; other inspections are done through visual comparisons.

We do not provide warranties on any electrical item or goods involving electronic components. We are not responsible for misuse, abuse, or other actions of the shippers or buyers that damage products. (Can only view the date of dispatch). The item "VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)" is in sale since Thursday, April 19, 2018.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\Gas Welding Torches". The seller is "powersportsandoutdoors" and is located in Rayne, Louisiana.

This item can be shipped to United States.

  • Model: GENUINE VICTOR 315FC / 2460CA
  • Modified Item: No
  • Country/Region of Manufacture: Unknown
  • Custom Bundle: Yes
  • Uses: Welding, Brazing, and Cutting
  • Comes with Check Valves: Built in Reverse Flow Check Valves inTorch Handle
  • Qualifier1: Acetylene/Oxygen Torch
  • Cutting Attachment: 2460 Cutting Attachment
  • Other Factors:: Popular, Best Selling, High Demand
  • INSTRUCTIONS: NONE (No papers included)
  • Identifier: Victor 315FC Torch
  • Specific Identifier: CA2460
  • Finish: Blemishes In Finish Are Normal
  • Handle Type: 315FC
  • MPN: 315FC / 2460CA
  • Markings: EU (Not EASB Brand)
  • Fast Shipper: Yes, One of Ebay's Fastest
  • Torch Series: 300 Series
  • Additional Idenitifer: 315FC Series Torch
  • Style: Victor
  • Additional Finish Details: Protective gold coating.
  • US Supplier: Yes
  • Brand: VICTOR - EU Markings
  • Non-Domestic Product: No
  • Bundle Description: Propane Kit Setup


VICTOR 315FC TORCH With2460 CUTTING ATTACHMENT & REGULATORS (PROPANE KIT SETUP!)