Pictured with 288 Flashback Arrestors, we are currently out of stock of 288s. ACETYLENE/OXYGEN CUTTING/WELDING KIT SETUP WITH REGULATORS!!Victor Type FC100 Series Cutting Torch (Handle and Cutting Attachment) ACETYLENE/OXYGEN CUTTING/WELDING Kit Setup!!! Lightweight-Easy on the Hands (Not even 2 pounds without the cutting tip). Yes, this torch can accept Propane and other gases and can use other tips including propane cutting tips, heating tips, and the handle can accept 100 Series (Medium Duty) Welding/Brazing Tips - all available in our store. We assembled this package for our Acetylene Cutting Specialists in the field.
We have a 100 Series Propane Setup and the 300 Series Heavy Duty Model in other listings. Works with all Fuel Gases. Length (Approx): 8.5 (215.9mm).Weight (Approx): 16.5oz (0.4677671kg). Smooth Cutting Valve (Pull Type). Brass Coupling Nut and Double "O" Ring Seal giving quick gas-tight seal tightening without wrench. Length (Approx): 8.125 (206.375mm). Weight (Approx): 13.5oz (0.3827186kg). Cutting Range: 6 (152.4mm). Note: Instructions Not Included; No booklet included. Total Torch Length: Approximately 15 (381mm).
Then as any experience welder should do, check your lines, torch, and all connections with soap and water for leaks before igniting. 100 Series Premium quality, brand-new Victor style Acetylene/Oxygen Cutting Tip. Qty (1) Size #0 100 Series Premium quality, brand-new Victor style Acetylene/Oxygen Brazing (Welding-Swan) Tip. Qty (1) Size #1 100 Series Premium quality, brand-new Victor style Acetylene/Oxygen Brazing (Welding-Swan) Tip. Qty (1) Size #2 100 Series Premium quality, brand-new Victor style Acetylene/Oxygen Brazing (Welding-Swan) Tip.
Qty (1) Size #3 100 Series Premium quality, brand-new Victor style Acetylene/Oxygen Brazing (Welding-Swan) Tip. Qty (1) Size #4 100 Series Premium quality, brand-new Victor style Acetylene/Oxygen Brazing (Welding-Swan) Tip.
Qty (1) Size #1 100 Series Premium quality, brand-new Victor style MFA Rosebud Heating Tip. Qty (1) Pair Red Welder Gloves. Full cotton liner, Cow split, Reinforce in thumb, One piece of back, Size:15 w/ minor variations. Qty (1) Tip Cleaner Set-100mm size, includes Size numbers 6-26 Tip and Files, tapered ends, aluminum case.
Qty (1) Triple Flint Striker for Welding. Qty (1) Set of 188 Flashback Arrestors (connects at the torch end) Pictured with 288 Flashback Arrestors, we are currently out of stock of 288s. Qty (1) Set of additional Check Valves.#000, #00, #0, #1, #2, #3, #4, #5. Premium quality, brand-new Victor style Acetylene Cutting Tip. Acetylene (NOT PROPANE) (We have propane tips listed separately). Victor CA1260, CA1350, C1450, CA2060, CST800, C1400. Additional Compatibility with the following cutting heads. CST-800, C-1400, C-1450, C-1260, C-1350 and CA-2061. For Your Cutting Depth Reference (Chart Below).
Size #0 --3/8 to ½. Size #2 --1 to 1-1/2.
Size #3 --2 to 2-1/2. Size #5 --4 to 5. Victor Type (100 Series) Oxygen/Acetylene Brazing Welding Torch Tip Set-Sizes #0, #1, #2, #3, and #4. With MFA Rosebud Heating Tip Size #1. Please note: This welding tip is for 100 Series Victor and Victor Type Torches.Please check your measurements and compare and contrast in the pictures. We do carry 300 Series as well in different offerings. You will receive 6 (six) pieces in this set. Each tip is of different size. Premium quality Victor style Acetylene Welding/Brazing Nozzle Tip.
0-W-1, 1-W-1, 2-W-1, 3-W-1, 4-W-1 (Elbow nozzle tip with W-1 mixer) (Swan Tip). Welding/Brazing Tip Size: #0, #1, #2, #3, #4 (For 100 Series Torches, except J-100 Series). Tip Type : 1-piece copper elbow nozzle tip with built-in spiral mixer W-1. Mixer Type: Victor W-1 (medium duty) series.Spiral mixer blends oxygen and fuel. Flame Type: Long cone flame for general welding and brazi ng. Uses: For general purpose welding/brazing and preheating. Heating Tip Size: MFA- #1 (For 100 Series Torches, except J-100 Series).
Fits: Victor med-size 100 (NOT for J-100) series handles such as 100C/100FC/WH26/WH260 and other after markets versions. Heating Tip Size #1: 5-1/8oz. Additional Specs on Flashback Arrestors and Check Valves. I nlet Pressure(bar): 10. 288-L FUEL GAS (ISO 9001).
Inlet Pressure(bar): 1.5. Oxygen-Acetylene (or propane) Flashback 288 Arrestor Set. OXYGEN/ACETYLENE WELDING CHECK VALVE SET--FOR TORCH END use w/flashback arrestor.
You should never connect a welding torch to acetylene and oxygen tanks without first installing a set of flashback arrestors and check valves. Not using these safety devices, could possibly cause a flashback within the hose, then ultimately flow back into the tanks, causing a major explosion. This is an extremely rare occurrence, but a set of check valves and flashback arrestors will prevent it a from occurring. Check valves on the torch are a first, then Flashback arrestors on the gauges are the best protection possible. Don't take chances with your life or the life of others...Additional Specs on the Regulators. Outlet Connection: 9/16 Iron lid. Max Inlet Pressure: 0-400PSI (0-2800 KPa).
Max Outlet Pressure: 0-30PSI (0-200 KPa). All Brass with Iron lid. (Not including weekends and holidays). Cutting Tips-Propane (100 Series Torches).
Flashback Arrestors and Check Valves. Even if the items are from different categories.These items are new in box (NIB) unless otherwise specified. You must be 18 or older to order this product. In some areas, state and local laws further restrict or prohibit the sale and possession of some of our products, including air soft, blowguns, knives, etc. States: California, District of Columbia. Cities: Bridgeport (CT), Chicago (IL), Atlantic City (NJ), New York (NY), Brooklyn (NY), Bronx (NY), Staten Island (NY), Queens (NY), Glen Oaks (NY), Floral Park (NY), Philadelphia (PA).
This product, if air soft, knives, or blowgun, may be mistaken for a firearm (or weapon) by law enforcement officers or others, and altering its color or brandishing, or even possession, of the product in public may be considered a crime. It is unlawful to alter the coloration or markings to make the product look more realistic.If and air soft product, then it is considered an Air soft toy gun; it complies with all federal laws and regulations. We do not provide warranties with our products.
Some items we are fully able to test; other inspections are done through visual comparisons. We do not provide warranties on any electrical item or goods involving electronic components. We are not responsible for misuse, abuse, or other actions of the shippers or buyers that damage products.(Can only view the date of dispatch). The item "VICTOR TYPE 100FC CUTTING/WELDING TORCH KIT WITH TIPS, REGULATORS, MORE" is in sale since Wednesday, April 25, 2018. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\Gas Welding Torches". The seller is "powersportsandoutdoors" and is located in Rayne, Louisiana. This item can be shipped to United States.