100mm Z-axis Torch Holder Lifter for CNC Plasma/Flame Cutting Machine

100mm Z-axis Torch Holder Lifter for CNC Plasma/Flame Cutting Machine. Portable/desktop light duty CNC flame/plasma cutting machine. This flame/plasma cutting machine Z-axis torch lifter is driven by DC gear motor to lift the torch up & down. The most important part of the device, which is to keep the machine's cutting accuracy and to support plasma arc positioning function, is equipped with NPN proximity switches.

This lifter's machenical movement part is made of Taiwan TBI ballscrew, standard linear shaft(SFC) & linear slider on the ends; torch clamper/holder is made of bearing steel, and fasterned by linear sliders, which is to ensure the lifter movement's stability & verticality. Convenient to install, work simple, improving the work efficiency. 1 foot --D +; (motor positive). 2 feet --D -; (motor negative).

3 feet --Zero; (positioning normally open output). 4 feet --COM; (positioning normally open output). Note: Built-in limit (reverse diode). Includes jig (torch range 12mm-38mm). Lift inside a plasma arc positioning.

Aluminum body, the upper and lower aluminum sheet thickness of 8mm, forming a processing center. Weight: about 1.7 kg. Dimensions: length 320 W 80 H 60.

Mounting Hole Size Length: center distance between two holes 40mm. 1 x Set of CNC Cutting Torch Holder.

For this item, we can only send to United States(with tracking numbers). Your item will usually arrive within the estimated timeframe.

However, please note that there are certain circumstances that we unfortunately do not have control i. Weather condition, delay by postal office, etc. We are not responsible for undeliverable address. We will do our best to service for our client. Air control plug definition: 1 foot --D +; (motor positive) 2 feet --D -; (motor negative) 3 feet --Zero; (positioning normally open output) 4 feet --COM; (positioning normally open output) Note: Built-in limit (reverse diode) Parameter: 1.

T-304 stainless steel screw 2. Includes jig (torch range 12mm-38mm) 3. Lift inside a plasma arc positioning 4. Aluminum body, the upper and lower aluminum sheet thickness of 8mm, forming a processing center 5. Colour: black spray housing 7.

Weight: about 1.7 kg 10. Bearing weight: 3 kg 11. Dimensions: length 320 W 80 H 60 12. The item "100mm Z-axis Torch Holder Lifter for CNC Plasma/Flame Cutting Machine" is in sale since Saturday, December 29, 2018.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\Plasma Cutter Torches & Bodies". The seller is "kkmall666" and is located in California. This item can be shipped to United States.

Brand: Unbranded/Generic
MPN: Does Not Apply
UPC: 948618479064