Welding Cutting Torch

Torch Cutting Machine Track Torch Cutting Cutter

Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter
Torch Cutting Machine Track Torch Cutting Cutter

Torch Cutting Machine Track Torch Cutting Cutter
Next order will have a 25% Tariff added!!!!!!! Lately a new problem has shown up. At 1st I did supply parts and help but no longer. Decisions decisions, do I need one? All very important questions that need a No B. If you cut plate steel you need one! Will your steel plate know the difference between my unit and. Now why this unit over other less priced units? This is a very good question.

I travel to China a lot. I go to the Canton Fair, the Worlds largest machine show, where all of the machine manufactures go.

From welding equipment to air conditioning equipment, hammers to generators to tractors and more. This is the WORLDS LARGEST! 1,000s of manufactures go there.

For days I walk and talk to all of the various manufactures. Every year, twice a year. I look at all of the units. There is a reason I don't. In catalogs they look great, when you get them in your hands or better yet, go to the factories like I always do, you can see and feel the difference. I have walked away from every manufacture of these track cutters except this one factory. In China, a factory receives authorization to make a product. They are given a set of blueprints and they make that machine. You can have 50 or more companies making the same looking machine and all the parts might be interchangeable. This is why you might see the same looking machine that I have, but they are not. Many factories even use the exact same pictures in their ads, but the end product is not always the same. This has always been the problem; knowing which factory to work with. Additionally, China has had about 100,000 factories close in the past year. This is why when over 100,000 factories closed last year his business is going strong. For years I have been looking for this product. I have had some before and they were just OK. They worked, but the quality was not like these! This is why I paid more, but bought the best that I could. These are very nice units and they use standard Airco Style Tips! You can use Natural Gas, Propane, Mapp or Acetylene Gas with the right tips.

Other sellers have great reputations no doubt. But I have the best interaction with tools. Boy that doesn't sound good does it!

I bought my 1st welder about 35 years ago and I havent stopped! Bought my 1st Tig (a Link Arc) 25 years ago. I own, for personal use, a Lincoln 250 with a LN7, Pow Con 300 that I use with a LN 25, small Lincoln Mig, Thermal Dynamic 38XL plasma cutter, another 60 amp plasma cutter, Victor Professional Journeyman Oxy-Acetylene, Gas driven 300 amp stick and lots more! I cannot stand cheap crap tools!

And I wont sell them. You are going to love this toy! A little about the tool.

This unit uses a mechanical step-less variation device, which is a single cone drive system that sets your speed. This is a Mechanical Drive, No electronics to go out and has knurling on the drive wheel (all of the wheels are made out of steel, not plastic, not aluminum).

This keeps the machine running at a steady non-fluctuating speed down the track. And what does that mean?

This has a conveniently located control switch, clutch lever and speed adjustment knob. The torch tip can reach out about about 7-1/2 from the machine. You can bevel cut or straight cut (any angle you like from 45 degrees to straight up and down) your steel plate all the way up to 4 thick, effortlessly and accurately, saving on labor, gas, and clean up grinding later. I have a customer that uses this to cut his own blades for his Dozer, 12 feet long and 2 thick steel and he puts a nice clean angle on it. I include an adjustable radius bar for circle cutting. This lets you cut circles in steel from 4.5 to 46.5 in diameter. I have also included 2 tracks that are just about 6 long each. Check my feedback, I Always make my customers happy! These pictures are actual pictures of my machines taken at my shop. These are not Stock Pictures from the factory even the 1st picture that had the background cleaned up, every picture was taken on my desk!

I get asked about this every day, they really do look good! I hate to add this but...... My bank guarantees the funds are in there and..... I do not send balances back. Sorry that I had to add that!

The item "Torch Cutting Machine Track Torch Cutting Cutter" is in sale since Thursday, September 14, 2017. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding\Welders, Cutters & Torches\TIG Welders". The seller is "svgenerator" and is located in San Jose, California.

This item can be shipped to North, South, or Latin America.
  • MPN: Does Not Apply
  • Brand: O.
  • Processes: Torch
  • Power Source: 110/120V Electric
  • Current: 1 Phase

Torch Cutting Machine Track Torch Cutting Cutter