WELDING/CUTTING KIT w REGULATORS Acetylene/Oxy Victor Type 315FC/2460CA -NEW! Heavy Type, Victor Styled 315FC Handle/ Victor Styled CA2460 Torch.Welding, Cutting (Acetylene), Gouging Tips. Regulators, Flashback Arrestors, Check Valves, and More! This is a heavier torch than most Chinese Victor Types! With storage depending upon environmental factors, it may turn to a highly polished bronze color.
To refreshen, simply spray vinegar on it and wipe or blow dry with air compressor. Qty 1 Set 300 Series Welding (Swan) Tips -1 of each of size 000, 00, 0, 1, 2, 3, 4, 5, 6, and 7 (10pcs).
Qty 1 Set 300 Series Cutting Tips -1 of each size from 1101-000 thru 1101-8 (11pcs). Qty 1 Set 300 Series Gouging Tips - Qty 1 of each size 1-1-118, 2-1-118, and 3-1-118 (3pcs). Qty 1 High Quality Tip Cleaner (1pc). Qty 1 Set of 288 Flashback Arrestors (Attach at Regulator Side).Qty 1 Set of 188 Flashback Arrestors (Attach at Torch Side). Qty 1 Set of Check Valves (Attach to Torch). Qty 1 Triple Flint Striker. Qty 1 Flat Soapstone with Holder.
Qty 1 Gray Welder's Gloves. Note: Instructions Not Included; No booklet included. Victor Type 315FC torch handle for welding, brazing, cutting, and heating applications. This heavy duty 315FC torch handle features durable brass and stainless steel construction and threaded assembly design for ease of maintenance and repair. Victor torch handles have provided the foundation for welding, cutting, brazing and heating applications for decades.Built-in flashback arrestors with no need for accessory flash arrestors. Works with all fuel gases.
There are pressure restrictions for different gases. CA 2460, Heavy-Duty Cutting Attachment. Stainless steel tubes with Smooth cutting valve (push type). Brass coupling nut & double "O" ring tapered seal gives quick gas-tight seal without a tightening wrench. Length 9.75 (24.765cm) (not counting lever extension).Weight 26.625oz (754.806gms). For use with all fuel gases with appropriate tip. 10.5 (not counting lever extension). Spiral mixer blends oxygen and fuel.
Then as any experience welder should do, check your lines, torch, and all connections with soap and water for leaks before igniting. Victor Type HD (300 series) Oxygen/Acetylene. Brazing Welding Torch Tip Set - Sizes 000, 00, 0, 1, 2, 3, 4, 5, 6, and 7. You will receive Quantity 1 (one) of each o f the following sized tips for a total package of 10 (ten) different tip sizes.
Quantity 1 of each size -Sizes #000 thru #7. Model size: 000 Orifice: 0.4mm. Model size: 00 Orifice: 0.5mm. Model size: 0 Orifice: 0.6mm.
Model size: 1 Orifice: 0.8mm. Model size: 2 Orifice: 1.0mm. Model size: 3 Orifice: 1.2mm. Model size: 4 Orifice: 1.5mm.
Model size: 5 Orifice: 2.0mm. Model size: 6 Orifice: 2.6mm. Model size: 7 Orifice: 3.2mm. Premium quality Victor style welding/brazing tips 000-W, 00-W, 0-W, 1-W, 2-W, 3-W, 4-W, 5-W, 6-W, 7-W (elbow nozzle tips with mixer).
Fits Victor Type med-size 300 series handles such as 315C/310FC/310C/350/310R and other aftermarkets versions. Welding/Brazing (Swan) Tips -Victor and Victor Type-300 Series Torches. Victor Type HD (300 series) Oxygen/Acetylene Cutting Torch Tip. Model 1101-000 thru 1101-8 (11 Tip Package). You will receive the following tips in this package (SEE CHART).
11 Tips Model Number 1101-000 thru 1101-8. Numbers may appear as 000-1-101 through 8-1-101 but they are not original Victor. We are not associated with Victor Technologies. These are high quality, after-market tips for Victor and Victor Type Torches.Cutting Tip Chart Victor and Victor Type-300 Series Torches. Cutting/Gouging Rounded Tip Set - Victor Type 1-118 #1, #2, #3.
You will receive 3 (Three) Different Tips in this offer as described below. Cutting/Gouging Tip Victor Type 1-118 #1 Rounded Acetylene. High quality, brand-new Victor styled Rounded Acetylene Cutting/Gouging Tip 1-118 (#1). Deseaming, scarfing, gouging, weld preparation, removing defective welds and washing rivets.
Cutting/Gouging Tip Victor Type 1-118 #2 Rounded Acetylene. High quality, brand-new Victor styled Rounded Acetylene Cutting/Gouging Tip 1-118 (#2). Cutting/Gouging Tip Victor Type 1-118 #3 Rounded Acetylene.
High quality, brand-new Victor styled Rounded Acetylene Cutting/Gouging Tip 1-118 (#3). You will receive a set of 188 Flashback Arrestors which attach at the torch end, and one set of 288 Flashback Arrestors which attach at the regulator side, and a set of check valves which attach on the torch itself. Oxygen-Acetylene (or propane) Flashback 188 Arrestor Set. Oxygen-Acetylene (or propane) Flashback 288 Arrestor Set.
288-L FUEL GAS (ISO 9001). OXYGEN/ACETYLENE WELDING CHECK VALVE SET.FOR TORCH END use w/flashback arrestor. You should never connect a welding torch to acetylene and oxygen tanks without first installing a set of flashback arrestors and check valves. Not using these safety devices, could possibly cause a flashback within the hose, and then ultimately flow back into the tanks, causing a major explosion. This is an extremely rare occurrence, but a set of check valves and flashback arrestors will prevent it from occurring. Check valves on the torch are a first, and then Flashback arrestors on the gauges are the best protection possible.
Don't take chances with your life or the life of others... All Brass with Iron lid.
Qty 1 Pair of Gray Welder's Gloves. (Not including weekends and holidays). Cutting Tips-Propane (100 Series Torches). Flashback Arrestors and Check Valves. Even if the items are from different categories.These items are new in box (NIB) unless otherwise specified. You must be 18 or older to order this product.
In some areas, state and local laws further restrict or prohibit the sale and possession of some of our products, including air soft, blowguns, knives, etc. States: California, District of Columbia. Cities: Bridgeport (CT), Chicago (IL), Atlantic City (NJ), New York (NY), Brooklyn (NY), Bronx (NY), Staten Island (NY), Queens (NY), Glen Oaks (NY), Floral Park (NY), Philadelphia (PA). This product, if air soft, knives, or blowgun, may be mistaken for a firearm (or weapon) by law enforcement officers or others, and altering its color or brandishing, or even possession, of the product in public may be considered a crime.
It is unlawful to alter the coloration or markings to make the product look more realistic. If and air soft product, then it is considered an Air soft toy gun; it complies with all federal laws and regulations. We do not provide warranties with our products. Some items we are fully able to test; other inspections are done through visual comparisons.We do not provide warranties on any electrical item or goods involving electronic components. We are not responsible for misuse, abuse, or other actions of the shippers or buyers that damage products.
(Can only view the date of dispatch). This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Gas Welding Torches".
The seller is "powersportsandoutdoors" and is located in this country: US. This item can be shipped to United States, Canada.